TILTING DITCH CLEANING BUCKET 8° HD

Backhoe Loaders, Buckets, Excavators

Its tilting system enables to tilt it by 45° on both sides.

Its elongated shape avoids that the ground sticks to the bucket’s side walls and simplifies the discharge of loamy and wet materials. Used mainly to clean and level streets, ditches and dikes. It has been reinforced in all the most stressed areas.
The blade, the side cast cutters and side reinforcements and the rear strips are made of HB400. The check valve fitted as standard ensures the position is maintained during work, preventing accidental bucket rotation and for maximum safety.
. .
.
.
It has water drainage holes on the sides and bottom.
.

RAPID DISCHARGE

.

SAFETY

.

WEAR PROTECTION

.

Gallery

Related Products

DITCH CLEANING BUCKET 25° HD

Backhoe Loaders, Buckets, Excavators

The elongated shape of the heavy duty 25° ditch cleaning bucket, particularly popular in Scandinavian countries, prevents earth from sticking to the sides and facilitates discharge of the material.

The 25° flare and the 8° conical end make it especially suitable for use in combination with the Rototwist system, since they enable the bucket to be rotated inside the ditch without damaging it. Strongly reinforced in all zones most subject to stress, it is ideal for constructing and maintaining slopes, banks and ditches even on rocky and particularly abrasive terrain.
In stressed areas, the 25° heavy duty ditch cleaning bucket features exceptionally strong HB400 steel, used in the reinforcing bands welded to the bottom, in the cast side cutters and in the side reinforcements. This rugged bucket is thus very tough and offers a long working life.
The blade is also entirely in hard-wearing HB400 steel.
The Cangini ditch cleaning bucket is recommended for clearing, repairing and constructing slopes, for maintaining drainage ditches, for environmental reclamation works and for roadside maintenance.
Its distinctive design ensures higher load capacity combined with more effective ditch bank levelling.
It has water drainage holes on the sides and bottom.
Its distinctive design ensures higher load capacity combined with more effective ditch bank levelling. It has water drainage holes on the sides and bottom. The wide range of models allows the perfect match for every excavator, providing the best performance for each specific class and application from 0.8 to 22 ton.

RAPID DISCHARGE

The elongated profile facilitates the discharge of material.

PERFECT FINISHING

The 8° conical end with 25° flare means that when combined with the Rototwist system, this bucket is able to rotate inside the ditch without damaging it.

WEAR PROTECTION

The HB400 high strength steel used in the zones exposed to the greatest stress protects the bucket from wear and maintains its penetration capacity intact over time.

Gallery

Related Products

BSF FIBER DIGGING BUCKET

+ VEDI PRODOTTO

SPG RAKE BUCKET

+ VEDI PRODOTTO

NETHERLANDS TILTING DITCH CLEANING BUCKET SQN

+ VEDI PRODOTTO

DITCH CLEANING BUCKET SPS 8° HD

Backhoe Loaders, Buckets, Excavators

The elongated profile, tapered shape and conical rear with 8° angle facilitate the discharge of material because they prevent earth from sticking to the sides and enable it to slide more easily. Strongly reinforced in all zones most subject to stress, the heavy duty 8° ditch cleaning bucket is ideal for constructing and maintaining slopes, banks and ditches even on rocky and particularly abrasive terrain. This bucket is particularly popular in Scandinavian countries.

In stressed areas, the Cangini 8° heavy duty ditch cleaning bucket features exceptionally strong HB400 steel, used in the reinforcing bands welded to the bottom, in the cast side cutters and in the side reinforcements. This rugged bucket is thus very tough and offers a long working life. The blade is also entirely in hard-wearing HB400 steel. This rugged bucket is thus very tough and offers a long working life.
The blade is also entirely in hard-wearing HB400 steel.
The Cangini ditch cleaning bucket is recommended for clearing, repairing and constructing slopes, for maintaining drainage ditches, for environmental reclamation works and for roadside maintenance.
Its distinctive design ensures higher load capacity combined with more effective ditch bank levelling.
It has water drainage holes on the sides and bottom.
Its distinctive design ensures higher load capacity combined with more effective ditch bank levelling. It has water drainage holes on the sides and bottom. The wide range of models allows the perfect match for every excavator, providing the best performance for each specific class and application from 0.8 to 22 ton.

RAPID DISCHARGE

The elongated profile, tapered shape and conical rear with 8° angle facilitate the discharge of material because they prevent earth from sticking to the sides and enable it to slide more easily.

WEAR PROTECTION

The HB400 high strength steel used in the zones exposed to the greatest stress protects the bucket from wear and maintains its penetration capacity intact over time.

Gallery

Related Products

BSF FIBER DIGGING BUCKET

+ VEDI PRODOTTO

SPG RAKE BUCKET

+ VEDI PRODOTTO

NETHERLANDS TILTING DITCH CLEANING BUCKET SQN

+ VEDI PRODOTTO

CABLE BUCKET BS HD

Backhoe Loaders, Buckets, Excavators

An excellent bucket for burying cables and pipes, designed for digging precision trenches of minimal width. The reinforcements and the HB400 high strength steel used in the structure make it very useful for tough jobs and rocky, compacted and abrasive terrains. The heavy duty cable bucket is particularly popular in Scandinavian countries.

Cangini heavy duty cable buckets are the ideal choice for digging narrow trenches, and with their recessed sides they are able to work in points where cables and pipes intersect.
The elongated profile facilitates the discharge of materials because it prevents earth from sticking to the sides and enables it to slide more easily.
Thanks to the HB400 steel reinforcing bands welded to the bottom, an area subject to heavy stresses, and the extra-hard cast steel teeth, Cangini heavy duty buckets are especially high-performing and deliver a long working life.
Cast cutting blades fitted in the critical zones increase the ruggedness of the structure, and side reinforcements enhance wear resistance.
The blade is entirely in high-strength HB400 steel.
The blade is entirely in high-strength HB400 steel. The wide range of models allows the perfect match for every excavator, providing the best performance for each specific class and application from 0.8 to 22 ton.

ACCESSIBILITY

The recessed sides make it easier to cross water, gas, etc. pipe systems.

WEAR PROTECTION

The horizontal reinforcement bands in HB400 high-strength steel and the extra-hard cast steel teeth blade protect the bucket from wear.

WEAR RESISTANCE

The reinforced blade, the cutters and the HB400 reinforcements enable this bucket to withstand even the toughest working conditions.

Related Products

BSF FIBER DIGGING BUCKET

+ VEDI PRODOTTO

SPG RAKE BUCKET

+ VEDI PRODOTTO

NETHERLANDS TILTING DITCH CLEANING BUCKET SQN

+ VEDI PRODOTTO

DIGGING BUCKET SCS HD

Backhoe Loaders, Buckets, Excavators

The elongated shape of the heavy duty digging bucket, particularly popular in Scandinavian countries, prevents earth from sticking to the sides and facilitates discharge of the material. The reinforcements and the HB400 high strength steel used in the structure make it ideal for tough digging jobs and rocky, compacted and abrasive terrains.

Thanks to the HB400 steel reinforcing bands welded to the bottom, an area subject to heavy stresses, and the extra-hard cast steel teeth, Cangini heavy duty buckets are especially rugged and deliver a long working life.
Cast cutting blades fitted in the critical zones increase the ruggedness of the structure, and side reinforcements enhance wear resistance.
The reinforced blade is entirely in HB400 steel.
The distinctive design of these Cangini buckets ensures higher load capacity, while the angled shape reduces resistance to the terrain, for quicker, easier penetration. The result is more filling and better digging.
The wide range of models (12) allows the perfect match for every excavator, providing the best performance for each specific class and application from 0.8 to 22 ton.
The advantages increase even more in combination with the Twist system, enabling the bucket to tilt up to 90° on either side, or Rototwist, allowing 55° tilt and 360° rotation.

RAPID DISCHARGE

The elongated profile facilitates the discharge of material.

WEAR PROTECTION

The horizontal reinforcement bands in HB400 high-strength steel and the extra-hard cast steel teeth blade protect the bucket from wear.

WEAR RESISTANCE

The reinforced blade, the cutters and the HB400 reinforcements enable this bucket to withstand even the toughest working conditions.

Gallery

Related Products

BSF FIBER DIGGING BUCKET

+ VEDI PRODOTTO

SPG RAKE BUCKET

+ VEDI PRODOTTO

NETHERLANDS TILTING DITCH CLEANING BUCKET SQN

+ VEDI PRODOTTO

TILTING DITCH CLEANING BUCKET SQS 8° GD

Backhoe Loaders, Buckets, Excavators

Bidirectional tilting up to 45° makes the general duty tilting 8° ditch cleaning bucket particularly useful for maintenance and construction jobs on sloping ground. The elongated profile, tapered shape and conical rear with 8° angle facilitate the discharge of materials because they prevent earth from sticking to the sides and enable it to slide more easily. Due to its characteristics, this bucket is particularly popular in Scandinavian countries.

Thanks to the HB400 steel reinforcing bands welded to the bottom, an area subject to heavy stresses, and the extra-hard cast steel teeth, Cangini heavy duty buckets are especially rugged and deliver a long working life.
Cast cutting blades fitted in the critical zones increase the ruggedness of the structure, and side reinforcements enhance wear resistance.
The reinforced blade is entirely in HB400 steel.
The distinctive design of these Cangini buckets ensures higher load capacity, while the angled shape reduces resistance to the terrain, for quicker, easier penetration. The result is more filling and better digging.
The wide range of models (12) allows the perfect match for every excavator, providing the best performance for each specific class and application from 0.8 to 22 ton.
The advantages increase even more in combination with the Twist system, enabling the bucket to tilt up to 90° on either side, or Rototwist, allowing 55° tilt and 360° rotation.

RAPID DISCHARGE

The elongated profile and conical rear with 8° angle facilitate the discharge of material.

SAFETY

The check valve fitted as standard ensures that bucket position is maintained during work for maximum safety.

WEAR PROTECTION

The horizontal reinforcement bands and the HB400 high-strength steel blade protect the bucket from wear and maintain its penetration capacity intact over time.

Related Products

BSF FIBER DIGGING BUCKET

+ VEDI PRODOTTO

SPG RAKE BUCKET

+ VEDI PRODOTTO

NETHERLANDS TILTING DITCH CLEANING BUCKET SQN

+ VEDI PRODOTTO

DITCH CLEANING BUCKET SPS 25° GD

Backhoe Loaders, Buckets, Excavators

The elongated shape of the general duty 25° ditch cleaning bucket, particularly popular in Scandinavian countries, prevents earth from sticking to the sides and facilitates discharge of materials. The 25° flare and the 8° conical end make it especially suitable for use in combination with the Rototwist system, enabling the bucket to be rotated inside the ditch without damaging it.

The high strength steel used in its structure makes the Cangini bucket the ideal choice for constructing and maintaining slopes, banks and ditches.
The reinforcing bands welded to the bottom, an area subject to heavy stresses, make this a rugged bucket that offers a long working life.
The blade is entirely in hard-wearing HB400 steel.
Its distinctive design ensures higher load capacity combined with more effective ditch bank levelling.
It has water drainage holes on the sides and bottom.
The Cangini ditch cleaning bucket is recommended for clearing, repairing and constructing slopes, for maintaining drainage ditches, for environmental reclamation works and for roadside maintenance.
Its distinctive design ensures higher load capacity combined with more effective ditch bank levelling. It has water drainage holes on the sides and bottom. The wide range of models allows the perfect match for every excavator, providing the best performance for each specific class and application from 0.8 to 22 ton.

RAPID DISCHARGE

The elongated profile facilitates the discharge of material.

PERFECT FINISHING

The 8° conical end with 25° flare means that this bucket is able to rotate inside the ditch without damaging it.

WEAR PROTECTION

The HB400 high-strength steel blade and the horizontal reinforcement bands protect the bucket from wear and maintain its penetration capacity intact over time.

Related Products

BSF FIBER DIGGING BUCKET

+ VEDI PRODOTTO

SPG RAKE BUCKET

+ VEDI PRODOTTO

NETHERLANDS TILTING DITCH CLEANING BUCKET SQN

+ VEDI PRODOTTO

DITCH CLEANING BUCKET SPS 8° GD

Backhoe Loaders, Buckets, Excavators

The elongated profile, tapered shape and conical rear with 8° angle facilitate the discharge of material because they prevent earth from sticking to the sides and enable it to slide more easily. The general duty 8° ditch cleaning bucket is particularly popular in Scandinavian countries.

The high strength steel used in its structure, the bands and the reinforced blade make the Cangini bucket the ideal choice for constructing and maintaining slopes, banks and ditches.
The reinforcing bands welded to the bottom, an area subject to heavy stresses, make this a rugged bucket that offers a long working life.
The blade is entirely in hard-wearing HB400 steel.
Its distinctive design ensures higher load capacity combined with more effective ditch bank levelling.
It has water drainage holes on the sides and bottom.
The Cangini ditch cleaning bucket is recommended for clearing, repairing and constructing slopes, for maintaining drainage ditches, for environmental reclamation works and for roadside maintenance.
Its distinctive design ensures higher load capacity combined with more effective ditch bank levelling. It has water drainage holes on the sides and bottom. The wide range of models allows the perfect match for every excavator, providing the best performance for each specific class and application from 0.8 to 22 ton.

RAPID DISCHARGE

The elongated profile facilitates the discharge of material.

WEAR PROTECTION

The horizontal reinforcement bands and the HB400 high-strength steel blade protect the bucket from wear and maintain its penetration capacity intact over time.

Related Products

BSF FIBER DIGGING BUCKET

+ VEDI PRODOTTO

SPG RAKE BUCKET

+ VEDI PRODOTTO

NETHERLANDS TILTING DITCH CLEANING BUCKET SQN

+ VEDI PRODOTTO

SKELETON BUCKET VS GD

Backhoe Loaders, Buckets, Excavators

The elongated shape of the general duty skeleton bucket, particularly popular in Scandinavian countries, prevents earth from sticking to the sides and facilitates the discharge of material. The high strength steel and the reinforced structure make it rugged and durable, the ideal choice for separating stones and aggregates, even in water, and for land reclamation.

Thanks to its robust structure and reinforced blade, entirely in HB400, this bucket delivers a long working life and high performance in the screening and recovery of aggregates, including demolition rubble.
The size of the separated material depends on the distance between the tines.
The wide range of models (12) allows the perfect match for every excavator, providing the best performance for each specific class and application from 0.8 to 22 ton.
The advantages increase even more in combination with the Twist system, enabling the bucket to tilt up to 90° on either side, or Rototwist, allowing 55° tilt and 360° rotation.

RAPID DISCHARGE

The elongated profile facilitates the discharge of material.

WEAR PROTECTION

The reinforced blade in HB400 high-strength steel protects the bucket from wear and enables it to withstand even the toughest operating conditions.

Gallery

Related Products

BSF FIBER DIGGING BUCKET

+ VIEW PRODUCT

SPG RAKE BUCKET

+ VIEW PRODUCT

NETHERLANDS TILTING DITCH CLEANING BUCKET SQN

+ VIEW PRODUCT

CABLE BUCKET BS GD

Backhoe Loaders, Buckets, Excavators

An excellent bucket for burying cables and pipes, designed for digging precision trenches of minimal width. The general duty cable bucket is particularly popular in Scandinavian countries.

Cangini general duty cable buckets are the ideal choice for digging narrow trenches, and with their recessed sides they are able to work in points where cables and pipes intersect.
The elongated profile facilitates the discharge of materials because it prevents earth from sticking to the sides and enables it to slide more easily.
The reinforcing bands welded to the bottom, an area subject to heavy stresses, make this a high-performing bucket that offers a long working life.
The blade is entirely in high-strength HB400 steel.
The blade is entirely in high-strength HB400 steel. The wide range of models allows the perfect match for every excavator, providing the best performance for each specific class and application from 0.8 to 22 ton.

RAPID DISCHARGE

The elongated profile facilitates the discharge of material.

WEAR-RESISTANCE

The horizontal reinforcing bands safeguard the bucket from wear and withstand heavy stresses.

HIGH PERFORMANCES

The HB400 high-strength steel blade is highly durable and maintains the bucket’s penetration capacity intact over time.